Wire Rod Through Type Blast Machines

1.The application of this machine:This shot blasting machine is suitable for remove rust and clean the surface of wire rods.Using blast wheel / turbine which is produced by advanced technology throwing four shares beam to hit the fast-moving wire circumferential and it can removal on the layer of rust and oxide, and thus obtain clean metal surface, metal products manufacturing use this machine and benefits are as follows:Remove rust and oxide layer on the surface of the wire.After blasting, wire rod surface presents a uniform roughness, which will help to increase the adhesion of the aluminum clad copper clad, cladding uniform will never fall off.Eliminate the internal stress generated in the wire drawing process.Increasing the wire surface tensile strength and resistance to stress corrosion cracking, permanent life. The machine is best suitable models for wire surface oxide skin treatment.1)Single Wire Shot Blasting Machine:Wire Rod Shot Blasting Machine for Cleaning Surface2)Coil WireShotBlastingMachine:Wire Rod Shot Blasting Machine for Cleaning Surface 2.The characteristics of the machine:1.Efficiency is high, after blasting the wire surface is clean, shows metallic color.2.The blast wheel is equipped with special shape of blade, concentrated blasting and the shots are density and improve productivity.3.The wire is spaced by oriented spacing , so it can control the swing of the wire being cleaned and reach the cleaning purpose.4.It adopts many domestic and foreign advanced technology, technical content of functional components are increased so that the machine runs low fault rate, high rate of boot. The sealing effect is good, reach to purify the environment index requirements of environmental protection.We will recommend you the right machine according to the workpiece and your requirement.It is a dedicated to clean steel, wire rod, round bar, bar shotblast cleaning equipment. It can to the original state of the surface of the steel with powerful shot, get rid of the rust layer on its, welding slag and scale, to obtain uniform metallic luster, in order to improve the quality of finishing of steel and anti-corrosion effect. This machine can be directly supporting for cold drawing machine to improve the quality of cold drawing.Wire Rod Shot Blasting Machines is designed according to user requirements and a new type of special equipment is used to clean up a special steel, wire shot blasting equipment. It's the original state of the steel surface blasting impose strong, get rid of its rust layer, welding slag and scale, and thus obtain a uniform metallic luster, in order to improve the quality and finishing of steel corrosion effect.This series equipment uses all protects and the non-pit design, and is disposited wire rods special-purpose force built-in impeller heads, the wearing parts are few, the replacement is simple quickly, the production efficiency is extremely high.It presents even roughness of the wire rods surface after shot blasting, which increases an aluminum package of copper, causes the envelope even never fall off, eliminates the interval stress which in the wire rods when drawing process produces, increase the tensile strength as well as the anti-stress corrosion dehiscence performance of the wire rods' surface, obtains the permanent service life.Technical parameter of Shot Blasting MachinemodelQXII40QXII24Dimension of Wire Rod5.5-40mm6-24mmSpeed of process10-120m/min20~150m/minQuantity of wheel44Wheel power18.5kw22kwPower consumption100kw162.75kwOverall dimension3440x1575x3630mm3200x1800x4500mmWe will recommend you the right machine according to the workpiece and your requirement.The characteristics of the machine:1High efficiency and energy saving, automation, saving manpower, at atime processing2Instead of pickling, protect the environment, less investment.3Save compact structure, cover an area of an area, without foundation.4Simple structure, convenient maintenance.5Improve the fatigue resistance, eliminate the internal stress.